With only a couple of days left in 2017, it’s time to start preparing for the New Year. For the maintenance staff, the overall fire safety of your building should be high on your to do list. If your AHJ visited your facility tomorrow, would your passive fire protection systems fall within code standards? Do you have a complete barrier management program in place? If not, you not only run the risk of receiving a hefty fine, but most importantly the occupants of your building are in danger.
Barrier management is a program designed to help you maintain your fire-rated barriers. It is made up of your facility’s passive fire protection systems including fire and smoke dampers, fire doors as well as firestopping.
As an end of the year refresher, here is what you need to know about your passive fire protection systems.
Fire/Smoke Dampers prevent the spread of fire and smoke within the facility’s ductwork. According to The National Fire Protection Association (NFPA) 80 and 105, “Each damper shall be tested and inspected every 4 years, except in hospitals, which is every 6 years”.
Fire Doors similar to dampers, prevent the spread of fire and smoke between the facility’s fire barriers. NFPA 80 requires that, “Fire door assemblies must be inspected and tested annually, with a written record of the inspection signed and kept for the inspection by the AHJ”.
Firestopping is the maintenance of the facility’s fire barriers. According to the 2009 International Fire Code (IFC), “Firewalls, partitions, smoke barriers, ceilings and floors must be maintained annually and properly repaired, restored or replaced when damaged, altered, breached or penetrated”.
As we move forward into 2018, ensure that your passive fire protection features are properly working with a barrier management program and start the New Year stress free!